Configuring basic IPv6 IS-IS
Before you configure basic IPv6 IS-IS, complete the following tasks:
Configure IPv6 addresses for interfaces to ensure IPv6 connectivity between neighboring nodes.
Enable IS-IS.
Basic IPv6 IS-IS configuration can implement the interconnection of IPv6 networks.
To configure basic IPv6 IS-IS:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable an IS-IS process and enter IS-IS view. | isis [ process-id ] [ vpn-instance vpn-instance-name ] | By default, no IS-IS process is enabled. |
3. Configure the network entity title (NET) for the IS-IS process. | network-entity net | By default, no NET is configured. |
4. Enable IPv6 for the IS-IS process. | ipv6 enable | The default setting is disabled. |
5. Return to system view. | quit | N/A |
6. Enter interface view. | interface interface-type interface-number | N/A |
7. Enable IPv6 for an IS-IS process on the interface. | isis ipv6 enable [ process-id ] | The default setting is disabled. |