Specifying LSA transmission delay

Each LSA in the LSDB has an age that is incremented by 1 every second, but the age does not change during transmission. Therefore, it is necessary to add a transmission delay into the age time, especially for low-speed links.

To specify the LSA transmission delay on an interface:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter interface view.

interface interface-type interface-number

N/A

3. Specify the LSA transmission delay.

ospfv3 trans-delay seconds [ instance instance-id ]

By default, the LSA transmission delay is 1 second.