Configuring basic RIPng

Before you configure basic RIPng, configure IPv6 addresses for interfaces to ensure IPv6 connectivity between neighboring nodes.

To configure basic RIPng:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Create a RIPng process and enter its view.

ripng [ process-id ] [ vpn-instance vpn-instance-name ]

By default, the RIPng process is not created.

3. Return to system view.

quit

N/A

4. Enter interface view.

interface interface-type interface-number

N/A

5. Enable RIPng on the interface.

ripng process-id enable

By default, RIPng is disabled.

If RIPng is not enabled on an interface, the interface does not send or receive any RIPng route.