Configuring match criteria for a node
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter policy node view. | policy-based-route policy-name [ deny | permit ] node node-number | N/A |
3. Configure an ACL match criterion. | if-match acl acl-number{ acl-number | name acl-name } | By default, no ACL match criterion is configured. |
![]() | NOTE: If an ACL match criterion is defined, packets are matched against the ACL rules, and the permit or deny action and the time range of the specified ACL are ignored. If the specified ACL does not exist, no packet is matched. | |