Configuring OSPF exit overflow interval

When the number of LSAs in the LSDB exceeds the upper limit, the LSDB is in an overflow state. To save resources, OSPF does not receive any external LSAs and deletes the external LSAs generated by itself when in this state.

Perform this task to configure the interval that OSPF exits overflow state.

To configure the OSPF exit overflow interval:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter OSPF view.	ospf [ process-id \| router-id router-id \| vpn-instance vpn-instance-name ] *	N/A
3. Configure the OSPF exit overflow interval.	lsdb-overflow-interval interval	The default setting is 300 seconds. The value of 0 indicates that OSPF does not exit overflow state.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter OSPF view.

ospf [ process-id | router-id router-id | vpn-instance vpn-instance-name ] *

N/A

3. Configure the OSPF exit overflow interval.

lsdb-overflow-interval interval

The default setting is 300 seconds.

The value of 0 indicates that OSPF does not exit overflow state.

prev	up	next
Configuring the maximum number of external LSAs in LSDB	home	Enabling compatibility with RFC 1583