Configuring a virtual link

1. Enter system view.

system-view

N/A

2. Enter OSPF view.

ospf [ process-id | router-id router-id | vpn-instance vpn-instance-name ] *

N/A

3. Enter area view.

area area-id

N/A

4. Configure a virtual link.

vlink-peer router-id [ dead seconds | hello seconds | { { hmac-md5 | md5 } key-id { cipher cipher-string | plain plain-string } | simple { cipher cipher-string | plain plain-string } } | retransmit seconds | trans-delay seconds ] *

By default, no virtual link is configured.

Configure this command on both ends of a virtual link, and the hello and dead intervals must be identical on both ends of the virtual link.