Specifying the actions to be taken for hardware failures
The device automatically detects hardware failures on components, cards, and the forwarding plane. You can specify the actions to be taken in response to detected failures.
To specify the actions to be taken in response to hardware failures:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Specify the action to be taken in response to a type of hardware failures. | hardware-failure-detection { board | chip | forwarding } { off | isolate | reset | warning } | By default, the system takes the action of warning (sending traps) in response to hardware failures. |