Displaying the temperature information on your switch
Use the display environment command to display the temperature information of the sensors on the cards, including the current temperature and temperature thresholds.
# Display the temperature information of the cards on the switch.
<Sysname> display environment
In standalone mode:
System temperature information (degree centigrade): ------------------------------------------------------------------------------- Slot Sensor Temperature LowerLimit WarningLimit AlarmLimit ShutdownLimit 1 inflow 1 21 -25 70 80 N/A 1 outflow 1 24 -15 70 85 N/A 1 hotspot 1 27 -15 75 85 N/A 5 inflow 1 27 -20 65 85 N/A 5 outflow 1 27 0 70 85 N/A 5 hotspot 1 30 -10 70 80 N/A 12 inflow 1 23 -10 55 80 N/A 12 outflow 1 42 5 85 95 N/A
In IRF mode:
System temperature information (degree centigrade): ------------------------------------------------------------------------------- Slot Sensor Temperature LowerLimit WarningLimit AlarmLimit ShutdownLimit 1/1 inflow 1 21 -25 70 80 N/A 1/1 outflow 1 24 -15 70 85 N/A 1/1 hotspot 1 27 -15 75 85 N/A 1/5 inflow 1 27 -20 65 85 N/A 1/5 outflow 1 27 0 70 85 N/A 1/5 hotspot 1 30 -10 70 80 N/A 1/12 inflow 1 23 -10 55 80 N/A 1/12 outflow 1 42 5 85 95 N/A
Table 15: Command output
Field | Description |
---|---|
Slot |
|
Sensor | Temperature sensor:
|
Temperature | Current temperature. |
Lower limit | Lower temperature threshold. |
WarningLimit | Warning temperature threshold. |
AlarmLimit | Alarming temperature threshold. |
ShutdownLimit | Shut-down temperature threshold (currently not supported). |