Installing a fan tray

	CAUTION: The fan trays are heavy. Do not try to move a fan tray by yourself. Hold a fan tray by the bottom when moving it. Never attempt to lift a fan tray with its handle because the handle is not designed to support weight. Doing so might result in bodily injury or damage to the module.

Each of the 12508E and the 12518E has two fan trays. They are installed in the same way.

To install a fan tray:

1. Wear an ESD wrist strap and make sure it is correctly grounded.

2. Unpack the fan tray.

3. Remove the blank panel from the slot to be used.

   Figure 26: Removing the blank panel from the fan tray slot of the 12508E

   

4. Lift the fan tray and push it into the slot until it is firmly seated in the slot.

5. Fasten the captive screws on the front panel of the fan tray.

   Figure 27: Installing a fan tray