switchto mdc
Use switchto mdc to log in to a non-default MDC from the system view of the default MDC and enter MDC user view.
Syntax
switchto mdc mdc-name
Views
System view
Predefined user roles
network-admin
network-operator
Parameters
mdc-name: Specifies an MDC by its name, a case-sensitive string of 1 to 15 characters.
Usage guidelines
You can log in to an MDC only when the MDC is in active state.
Examples
# Log in to MDC sub1 from the system view of the default MDC.
<Sysname> system-view [Sysname] switchto mdc sub1 ****************************************************************************** * Copyright (c) 2010-2016 Hewlett Packard Enterprise Development LP * * Without the owner's prior written consent, * * no decompiling or reverse-engineering shall be allowed. * ****************************************************************************** <Sysname> <Sysname> display mdc ID Name Status 2 sub1 active
Related commands
switchback