pex-port

Use pex-port to create a PEX port and enter its view, or enter the view of an existing PEX port.

Use undo pex-port to delete a PEX port.

Syntax

pex-port pex-port-id

undo pex-port pex-port-id

Default

No PEX ports exist.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

pex-port-id: Specifies a PEX port number. The value range for the port number is 1 to 120.

Usage guidelines

PEX ports are logical ports for managing PEXs.

Each PEX must be assigned to a PEX port. All PEX settings for a PEX are configured on its PEX port.

Before you delete a PEX port, check its state. If the PEX port is in Online state, the delete operation will cause the attached PEX to reboot.

Examples

# Create PEX port 2.

<Sysname> system-view
[Sysname] pex-port 2
[Sysname-pex-port2]

Related commands

display pex-port