irf mode
Use irf mode to configure the IRF mode.
Use undo irf mode to remove the IRF mode configuration.
Syntax
irf mode { enhanced | light | normal }
undo irf mode { enhanced | light }
Default
The IRF mode is normal.
Views
System view
Predefined user roles
network-admin
Parameters
enhanced: Specifies enhanced IRF mode. In this mode, the device can operate as a parent device in an eIRF system. This mode supports a maximum of 60 PEXs.
light: Specifies light IRF mode. In this mode, the device can operate as a parent device in an eIRF system. This mode supports a maximum of 30 PEXs.
normal: Specifies normal IRF mode. In this mode, eIRF capability is disabled. The device can only form an independent IRF fabric with other devices.
Usage guidelines
This command is supported only in IRF mode. The command setting takes effect on all IRF member devices in an IRF fabric.
For a success IRF merge, make sure all IRF member devices operate in the same IRF mode.
Make sure no non-default MDCs are created when you set the IRF mode to enhanced or light. The irf mode { enhanced | light } command and the mdc command are mutually exclusive.
For the mode change to take effect, save the configuration and reboot the device.
Examples
# Set the IRF mode to enhanced.
<Sysname> system-view [Sysname] irf mode enhanced