display pex working-mode
Use display pex working-mode to display the operating mode settings for PEXs.
Syntax
display pex working-mode { all | chassis chassis-number slot slot-number1 [ to slot-number2 ] }
Views
Any view
Predefined user roles
network-admin
mdc-admin
Parameters
all: Specifies all PEXs.
chassis chassis-number slot slot-number1 [ to slot-number2 ]: Specifies a PEX or a range of PEXs.
chassis chassis-number: Specifies a virtual chassis number.
slot slot-number1: Specifies a PEX in the virtual chassis.
to slot-number2: Specifies a range of PEXs in the virtual chassis. The slot-number1 argument represents the start PEX slot number. The slot-number2 argument represents the end PEX slot number. The value for the slot-number2 argument must be greater than or equal to the value for the slot-number1 argument.
Usage guidelines
This command is supported only in IRF mode.
Examples
# Display the operating mode settings for all PEXs.
<Sysname> display pex working-mode all PEX device mode Configuration: Switch mode at startup: None PEX mode at startup: Chassis 101 slots 0
Table 8: Command output
Field | Description |
---|---|
PEX device mode Configuration | Displays the operating mode settings for PEXs. |
Switch mode at startup | Displays PEXs that will operate in switch mode after a reboot. |
PEX mode at startup | Displays PEXs that will operate in PEX mode after a reboot. |