irf priority
Use irf priority to assign an IRF member priority to a device in standalone mode.
Use undo irf priority to restore the default.
Syntax
irf priority priority
undo irf priority
Default
The IRF member priority is 1.
Views
System view
Predefined user roles
network-admin
Parameters
priority: Specifies an IRF member priority value in the range of 1 to 32. The greater the priority value, the higher the priority. A member with higher priority is more likely to be the master.
Usage guidelines
The member priority configured in standalone mode takes effect after you enable IRF mode.
To change the member priority of a device in IRF mode, use the irf member priority command. The new priority setting takes effect at the next master election, but it does not trigger a master election.
Examples
# (In standalone mode.) Assign IRF member priority 32 to the device.
[Sysname] system-view [Sysname] irf priority 32
Related commands
irf member priority