irf member description
Use irf member description to configure a description for an IRF member device.
Use undo irf member description to restore the default.
Syntax
irf member member-id description text
undo irf member member-id description
Default
No description is configured for an IRF member device.
Views
System view
Predefined user roles
network-admin
Parameters
member-id: Specifies the ID of an IRF member.
text: Specifies a description, a string of 1 to 127 characters.
Usage guidelines
This command is supported only in IRF mode. When you change the operating mode from IRF to standalone, the IRF member description is lost, regardless of whether you have saved the configuration.
Examples
# Configure the description as F1Num001 for IRF member 1.
<Sysname> system-view [Sysname] irf member 1 description F1Num001