irf auto-update enable

Use irf auto-update enable to enable the software auto-update feature.

Use undo irf auto-update enable to disable the software auto-update feature.

Syntax

irf auto-update enable

undo irf auto-update enable

Default

Software auto-update is enabled.

Views

System view

Predefined user roles

network-admin

Usage guidelines

This command is supported only in IRF mode. When you change the operating mode from IRF to standalone, the setting for this command is lost, regardless of whether you have saved the configuration. To disable software auto-update after you change the operating mode from standalone to IRF, use the undo form of this command.

This command automatically propagates the current software images of the master MPU in the IRF fabric to any MPUs you are adding to the IRF fabric.

To ensure a successful software update, verify that the new MPU you are adding to the IRF fabric has sufficient storage space for the new software images. If sufficient storage space is not available, the MPU automatically deletes the current software images. If the reclaimed space is still insufficient, the MPU cannot complete the auto-update. You must reboot the device that holds the MPU, and then access the BootWare menus to delete files.

Examples

# Enable the software auto-update feature.

<Sysname> system-view
[Sysname] irf auto-update enable