display irf topology

Use display irf topology to display IRF fabric topology information.

Syntax

display irf topology

Views

Any view

Predefined user roles

network-admin

network-operator

Examples

# Display the IRF fabric topology.

<Sysname> display irf topology
                           Topology Info
 -------------------------------------------------------------------------
               IRF-Port1                  IRF-Port2
 MemberID   Link        neighbor      Link        neighbor     Belong To
 1          DOWN        ---           UP          2            000f-cbb8-1a82
 2          UP          1             DIS         ---          000f-cbb8-1a82

Table 5: Command output

Field	Description
IRF-Port1	Information about IRF-port 1, including its link state and neighbor.
IRF-Port2	Information about IRF-port 2, including its link state and neighbor.
MemberID	IRF member ID.
Link	Link state of the IRF port: UP—The IRF link is up. DOWN—The IRF link is down because the port has no physical link or has not been activated by the irf-port-configuration active command. DIS—No physical interfaces have been bound to the IRF port. TIMEOUT—IRF hello interval has timed out. ISOLATE—The device is isolated from the IRF fabric. This issue might be caused by the following reasons: The IRF fabric does not support the device model. The maximum number of member devices has exceeded the upper limit.
neighbor	IRF member ID of the device connected to the IRF port. This field displays three hyphens (---) if no device is connected to the port.
Belong To	IRF fabric that has the device, represented by the CPU MAC address of the master in the IRF fabric.

Related commands

display irf

display irf configuration

prev	up	next
display irf link	home	display irf-port load-sharing mode