display irf configuration
Use display irf configuration to display basic IRF settings for each member device.
Syntax
display irf configuration
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# (In standalone mode.) Display the basic IRF settings of the device.
<Sysname> display irf configuration MemberID Priority IRF-Port1 IRF-Port2 1 1 disable disable
# (In IRF mode.) Display basic IRF settings for all members.
<Sysname> display irf configuration MemberID NewID IRF-Port1 IRF-Port2 1 1 Ten-GigabitEthernet1/1/0/1 disable Ten-GigabitEthernet1/1/0/2 2 2 disable Ten-GigabitEthernet2/1/0/1 Ten-GigabitEthernet2/1/0/2
Table 3: Command output
Field | Description |
---|---|
MemberID | Current member ID of the device. |
Priority | Member priority. This field is available when the device is operating in standalone mode. |
NewID | Member ID assigned to the device. This member ID takes effect at reboot. This field is available when the device is operating in IRF mode. |
IRF-Port1 | Physical interfaces bound to IRF-port 1. This field displays disable if no physical interfaces are bound to the IRF port. |
IRF-Port2 | Physical interfaces bound to IRF-port 2. This field displays disable if no physical interfaces are bound to the IRF port. |
Related commands
display irf
display irf topology