tunnel tos

Use tunnel tos to set the ToS of tunneled packets.

Use undo tunnel tos to restore the default.

Syntax

tunnel tos tos-value

undo tunnel tos

Default

The ToS of tunneled packets is the same as the ToS of the original packets.

Views

Tunnel interface view

Predefined user roles

network-admin

mdc-admin

Parameters

tos-value: Specifies the ToS of tunneled packets, in the range of 0 to 255.

Usage guidelines

After you configure this command, all the tunneled packets of different services sent on the tunnel interface will use the same configured ToS. For more information about ToS, see ACL and QoS Configuration Guide.

Examples

# Set the ToS of tunneled packets to 20 on Tunnel 1.

<Sysname> system-view
[Sysname] interface tunnel 1 mode gre
[Sysname-Tunnel1] tunnel tos 20

Related commands

display interface tunnel