ipv6 fast-forwarding aging-time
Use ipv6 fast-forwarding aging-time to set the aging time for IPv6 fast forwarding entries.
Use undo ipv6 fast-forwarding aging-time to restore the default.
Syntax
ipv6 fast-forwarding aging-time aging-time
undo ipv6 fast-forwarding aging-time
Default
The aging time is 30 seconds.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
aging-time: Sets the aging time in the range of 10 to 300 seconds.
Examples
# Set the aging time to 20 seconds for IPv6 fast forwarding entries.
<Sysname> system-view [Sysname] ipv6 fast-forwarding aging-time 20
Related commands
display ipv6 fast-forwarding aging-time