ipv6 dhcp snooping binding database update interval

Use ipv6 dhcp snooping binding database update interval to set the waiting time for the DHCPv6 snooping device to update the backup file after a DHCPv6 snooping entry change.

Use undo ipv6 dhcp snooping binding database update interval to restore the default.

Syntax

ipv6 dhcp snooping binding database update interval interval

undo ipv6 dhcp snooping binding database update interval

Default

The DHCPv6 snooping device waits 300 seconds to update the backup file after a DHCPv6 snooping entry change. If no DHCPv6 snooping entry changes, the backup file is not updated.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

interval: Sets the waiting time in seconds, in the range of 60 to 864000.

Usage guidelines

When a DHCPv6 snooping entry is learned, updated, or removed, the waiting period starts. The DHCPv6 snooping device updates the backup file when the waiting period is reached. All snooping entries changed during the period will be saved to the backup file.

The waiting time takes effect only after you configure the DHCPv6 snooping entry auto backup by using the ipv6 dhcp snooping binding database filename command.

Examples

# Set the waiting time to 600 seconds for the DHCPv6 snooping device to update the backup file.

<Sysname> system-view
[Sysname] ipv6 dhcp snooping binding database update interval 600

Related commands

ipv6 dhcp snooping binding database filename