display ipv6 dhcp snooping binding
Use display ipv6 dhcp snooping binding to display DHCPv6 snooping address entries.
Syntax
display ipv6 dhcp snooping binding [ address ipv6-address [ vlan vlan-id ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
address ipv6-address: Displays the DHCPv6 snooping entry for the specified IPv6 address.
vlan vlan-id: Specifies the ID of the VLAN where the IPv6 address resides.
Usage guidelines
If you do not specify any parameters, this command displays all DHCPv6 snooping address entries.
Examples
# Display all DHCPv6 snooping address entries.
<Sysname> display ipv6 dhcp snooping binding 1 DHCPv6 snooping entries found. IPv6 address MAC address Lease VLAN SVLAN Interface ================ ============== =========== ==== ===== ======================== 2::1 00e0-fc00-0006 54 2 N/A
Table 74: Command output
Field | Description |
---|---|
IPv6 Address | IPv6 address assigned to the DHCPv6 client. |
MAC Address | MAC address of the DHCPv6 client. |
Lease | Remaining lease duration in seconds. |
VLAN | When both DHCPv6 snooping and QinQ are enabled or the DHCPv6 packet contains two VLAN tags, this field identifies the outer VLAN tag. Otherwise, it identifies the VLAN where the port connecting the DHCPv6 client resides. |
SVLAN | When both DHCPv6 snooping and QinQ are enabled or the DHCPv6 packet contains two VLAN tags, this field identifies the inner VLAN tag. Otherwise, it displays N/A. |
Interface | Port connecting to the DHCPv6 client. |
Related commands
ipv6 dhcp snooping binding record
reset ipv6 dhcp snooping binding