gateway-list

Use gateway-list to specify gateway addresses for DHCPv6 clients in a DHCPv6 address pool.

Use undo gateway-list to remove gateway addresses from a DHCPv6 address pool.

Syntax

gateway-list ipv6-address&<1-8>

undo gateway-list [ ipv6-address&<1-8> ]

Default

No gateway address is specified in a DHCPv6 address pool.

Views

DHCPv6 address pool view

Predefined user roles

network-admin

mdc-admin

Parameters

ipv6-address&<1-8>: Specifies a space-separated list of up to eight addresses.

Usage guidelines

DHCPv6 clients of the same access type can be classified into different types by their locations. In this case, the relay interface typically has no IPv6 address configured. You can use the gateway-list command to specify gateway addresses for clients matching the same DHCPv6 address pool.

Upon receiving a DHCPv6 Solicit or Request from a client that matches a DHCPv6 address pool, the relay agent processes the packet as follows:

• Fills the link-address field of the packet with a specified gateway address.

• Forwards the packet to all DHCPv6 servers in the matching DHCPv6 address pool.

The DHCPv6 servers select a DHCPv6 address pool according to the gateway address.

Examples

# Specify the gateway address 10::1 in the DHCPv6 address pool p1.

<Sysname> system-view
[Sysname] ipv6 dhcp pool p1
[Sysname-dhcp6-pool-p1] gateway-list 10::1