display ipv6 dhcp relay server-address
Use display ipv6 dhcp relay server-address to display DHCPv6 server addresses specified on the DHCPv6 relay agent.
Syntax
display ipv6 dhcp relay server-address [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do not specify an interface, this command displays DHCPv6 server addresses on all interfaces enabled with DHCPv6 relay agent.
Examples
# Display DHCPv6 server addresses on all interfaces enabled with DHCPv6 relay agent.
<Sysname> display ipv6 dhcp relay server-address Interface: Vlan-interface2 Server address Outgoing Interface 2::3 3::4 Vlan-interface4 Interface: Vlan-interface3 Server address Outgoing Interface 2::3 3::4 Vlan-interface4
# Display DHCPv6 server addresses on VLAN-interface 2.
<Sysname> display ipv6 dhcp relay server-address interface vlan-interface 2 Interface: Vlan-interface2 Server address Outgoing Interface 2::3 3::4 Vlan-interface4
Table 70: Command output
Field | Description |
---|---|
Server address | DHCPv6 server address specified on the DHCP relay agent. |
Outgoing Interface | Output interface of DHCPv6 packets. If no output interface is specified, the device searches the routing table for the output interface. |
Related commands
ipv6 dhcp relay server-address
ipv6 dhcp select