reset ipv6 dhcp server ip-in-use

Use reset ipv6 dhcp server ip-in-use to clear binding information for assigned IPv6 addresses.

Syntax

reset ipv6 dhcp server ip-in-use [ [ address ipv6-address ] [ vpn-instance vpn-instance-name ] | pool pool-name ]

Views

User view

Predefined user roles

network-admin

mdc-admin

Parameters

address ipv6-address: Clears binding information for the specified assigned IPv6 address. If you do not specify an IPv6 address, this command clears binding information for all assigned IPv6 addresses.

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command clears binding information about assigned IPv6 addresses for the public network.

pool pool-name: Clears binding information for assigned IPv6 addresses in the address pool specified by its name, a case-insensitive string of 1 to 63 characters. If you do not specify an address pool, this command clears binding information for assigned IPv6 addresses in all address pools.

Usage guidelines

If you execute this command to clear information about an assigned static binding, the static binding becomes a free static binding.

Examples

# Clear binding information for all assigned IPv6 addresses.

<Sysname> reset ipv6 dhcp server ip-in-use

# Clears binding information for assigned IPv6 addresses in DHCPv6 address pool 1.

<Sysname> reset ipv6 dhcp server ip-in-use pool 1

# Clears binding information for the assigned IPv6 address 2001:0:0:1::1.

<Sysname> reset ipv6 dhcp server ip-in-use address 2001:0:0:1::1

Related commands

display ipv6 dhcp server ip-in-use