reset ipv6 dhcp server conflict

Use reset ipv6 dhcp server conflict to clear IPv6 address conflict information.

Syntax

reset ipv6 dhcp server conflict [ address ipv6-address ] [ vpn-instance vpn-instance-name ]

Views

User view

Predefined user roles

network-admin

mdc-admin

Parameters

address ipv6-address: Clears conflict information for the specified IPv6 address. If you do not specify an IPv6 address, this command clears all IPv6 address conflict information.

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command clears conflict information about IPv6 addresses for the public network.

Usage guidelines

Address conflicts occur when dynamically assigned IP addresses have been statically configured for other hosts. After the conflicts are resolved, you can use the reset ipv6 dhcp server conflict command to clear conflict information so that the conflicted addresses can be assigned to clients.

Examples

# Clear all IPv6 address conflict information.

<Sysname> reset ipv6 dhcp server conflict

Related commands

display ipv6 dhcp server conflict