ipv6 dhcp apply-policy
Use ipv6 dhcp apply-policy to apply a DHCPv6 policy to an interface.
Use undo ipv6 dhcp apply-policy to restore the default.
Syntax
ipv6 dhcp apply-policy policy-name
undo ipv6 dhcp apply-policy
Default
No DHCPv6 policy is applied to an interface.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
policy-name: Specifies a DHCPv6 policy by its name, a case-insensitive string of 1 to 63 characters.
Usage guidelines
You can apply only one DHCPv6 policy to an interface. If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Apply the DHCPv6 policy test to VLAN-interface 2.
<Sysname> system-view [Sysname] interface vlan-interface 2 [Sysname-Vlan-interface2] ipv6 dhcp apply-policy test
Related commands
ipv6 dhcp class