ipv6 reassemble local enable

Use ipv6 reassemble local enable to enable IPv6 local fragment reassembly.

Use undo ipv6 reassemble local enable to disable IPv6 local fragment reassembly.

Syntax

ipv6 reassemble local enable

undo ipv6 reassemble local enable

Default

IPv6 local fragment reassembly is disabled.

Views

System view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

Configure this command on a device to improve fragment reassembly efficiency. The command enables the LPU to reassemble the IPv6 fragments of a packet if all the fragments arrive at it. If this feature is disabled, all IPv6 fragments are delivered to the active MPU for reassembly. The command applies only to fragments destined for the same LPU.

Examples

# Enable IPv6 local fragment reassembly.

<Sysname> system-view
[Sysname] ipv6 reassemble local enable