ipv6 nd ra router-lifetime

Use ipv6 nd ra router-lifetime to set the router lifetime in RA messages.

Use undo ipv6 nd ra router-lifetime to restore the default.

Syntax

ipv6 nd ra router-lifetime time

undo ipv6 nd ra router-lifetime

Default

The router lifetime in RA messages is 1800 seconds.

Views

Interface view

Predefined user roles

network-admin

mdc-admin

Parameters

time: Specifies the router lifetime in the range of 0 to 9000 seconds. If the value is set to 0, the router does not act as the default router.

Usage guidelines

The router lifetime in RA messages specifies how long the router sending the RA messages acts as the default router. Hosts receiving the RA messages check this value to determine whether to use the sending router as the default router. If the router lifetime is 0, the router cannot be used as the default router.

The router lifetime in RA messages must be greater than or equal to the advertising interval.

Examples

# Set the router lifetime in RA messages on VLAN-interface 100 to 1000 seconds.

<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd ra router-lifetime 1000

Related commands

ipv6 nd ra interval