ipv6 nd mode uni

Use ipv6 nd mode uni to configure a port as a customer-side port.

Use undo ipv6 nd mode to restore the default.

Syntax

ipv6 nd mode uni

undo ipv6 nd mode

Default

A port acts as a network-side port.

Views

VLAN interface view

VSI interface view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

By default, the device associates an ND entry with routing information when the device learns an ND entry. The ND entry provides the next hop information for routing. To save hardware resources, you can use this command to specify a port that connects to a user terminal as a customer-side port. The device will not associate the routing information with the learned ND entries.

Examples

# Specify VLAN-interface 2 as a customer-side port.

<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] ipv6 nd mode uni