display ipv6 neighbors vpn-instance

Use display ipv6 neighbors vpn-instance to display neighbor information about a VPN instance.

Syntax

display ipv6 neighbors vpn-instance vpn-instance-name [ count ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. The VPN instance must already exist.

count: Displays the total number of neighbor entries in the specified VPN instance.

Examples

# Display neighbor information about the VPN instance vpn1.

<Sysname> display ipv6 neighbors vpn-instance vpn1
Type: S-Static    D-Dynamic    O-Openflow     R-Rule    I-Invalid
IPv6 address                   Link Layer      VID  Interface      State T  Age
FE80::200:5EFF:FE32:B800    0000-5e32-b800  N/A  XGE1/0/1       REACH IS -

Table 49: Command output

Field	Description
IPv6 address	IPv6 address of a neighbor.
Link-layer	Link layer address (MAC address) of a neighbor.
VID	VLAN to which the interface connected to a neighbor belongs.
Interface	Interface connected to a neighbor.
State	Neighbor state: INCMP—The address is being resolved. The link layer address of the neighbor is unknown. REACH—The neighbor is reachable. STALE—Whether the neighbor is reachable is unknown. The device does not verify the reachability any longer unless data is sent to the neighbor. DELAY—Whether the neighbor is reachable is unknown. The device sends an NS message after a delay. PROBE—Whether the neighbor is reachable is unknown. The device sends an NS message to verify the reachability of the neighbor.
T	Neighbor information type: S—Statically configured. D—Dynamically obtained. O—Learned from the OpenFlow module. I—Invalid.
Age	A hyphen (-) indicates a static entry. For a dynamic entry, this field displays the elapsed time in seconds. If the neighbor is never reachable, this field displays a pound sign (#).

prev	up	next
display ipv6 neighbors entry-limit	home	display ipv6 pathmtu