display ipv6 fib
Use display ipv6 fib to display IPv6 FIB entries.
Syntax
display ipv6 fib [ vpn-instance vpn-instance-name ] [ ipv6-address [ prefix-length ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command displays IPv6 FIB entries for the public network.
ipv6-address: Displays IPv6 FIB entries for a destination IPv6 address. If you do not specify an IPv6 address, this command displays all IPv6 FIB entries.
prefix-length: Specifies a prefix length for the IPv6 address, in the range of 0 to 128. If you do not specify the prefix length, this command displays the IPv6 FIB entry longest matching the IPv6 address.
Examples
# Display all IPv6 FIB entries for the public network.
<Sysname> display ipv6 fib Destination count: 1 FIB entry count: 1 Flag: U:Usable G:Gateway H:Host B:Blackhole D:Dynamic S:Static R:Relay F:FRR Destination: ::1 Prefix length: 128 Nexthop : ::1 Flags: UH Time stamp : 0x1 Label: Null Interface : InLoop0 Token: Invalid
Table 43: Command output
Field | Description |
---|---|
Destination count | Total number of destination addresses. |
FIB entry count | Total number of IPv6 FIB entries. |
Destination | Destination address. |
Prefix length | Prefix length of the destination address. |
Nexthop | Next hop address. |
Flags | Route flag:
|
Time stamp | Time when the IPv6 FIB entry was generated. |
Label | Inner MPLS label. For IPv6 FIB entries for the public network, this field displays Null. |
Interface | Outgoing interface. |
Token | Label switched path index number. |