ip reassemble local enable
Use ip reassemble local enable to enable IPv4 local fragment reassembly.
Use undo ip reassemble local enable to disable local fragment reassembly.
Syntax
ip reassemble local enable
undo ip reassemble local enable
Default
IPv4 local fragment reassembly is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
Use this feature on a device to improve fragment reassembly efficiency. This feature enables the LPU to reassemble the IPv4 fragments of a packet if all the fragments arrive at it. If this feature is disabled, all IPv4 fragments are delivered to the active MPU for reassembly. The feature applies only to fragments received by the same LPU.
Examples
# Enable IPv4 local fragment reassembly.
<Sysname> system-view [Sysname] ip reassemble local enable