ip irdp address

Use ip irdp address to specify an IP address for an interface to proxy-advertise.

Use undo ip irdp address to remove the specified proxy-advertised IP address.

Syntax

ip irdp address ip-address preference-value

undo ip irdp address [ ip-address ]

Default

No proxy-advertised IP address is specified.

Views

Interface view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address: Specifies an IP address in dotted decimal notation.

preference-value: Specifies the preference for the IP address, in the range of –2147483648 to 2147483647. A larger preference value represents a higher preference.

Usage guidelines

You can specify a maximum of four IP addresses for an interface to proxy-advertise. An RA sent on the interface includes the interface IP addresses and the proxy-advertised IP addresses.

If you do not specify an IP address for the undo command, this command removes all proxy-advertised IP addresses from the interface.

Examples

# Specify the IP address 192.168.0.8 and its preference 1600 for VLAN-interface 100 to proxy-advertise.

<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ip irdp address 192.168.0.8 1600

Related commands

ip irdp