ip-in-use threshold

Use ip-in-use threshold to set a threshold for the address pool usage alarming.

Use undo ip-in-use threshold to restore the default.

Syntax

ip-in-use threshold threshold-value

undo ip-in-use threshold

Default

The address pool usage threshold is 100%.

Views

DHCP address pool view

Predefined user roles

network-admin

mdc-admin

Parameters

threshold-value: Specifies the threshold for the address pool usage percentage. The value range is 1 to 100.

Usage guidelines

If you execute this command in the same address pool view multiple times, the most recent configuration takes effect.

When the address pool usage exceeds the threshold, the system sends log messages to the information center. According to the log information, you can optimize the address pool configuration. For more information about the information center, see Network Management and Monitoring Configuration Guide.

Examples

# Set the address pool usage threshold to 85%.

<Sysname> system-view
[Sysname] dhcp server ip-pool p1
[Sysname-dhcp-pool-p1] ip-in-use threshold 85