display proxy-arp

Use display proxy-arp to display the proxy ARP status.

Syntax

display proxy-arp [ interface interface-type interface-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

interface interface-type interface-number: Specifies an interface by its type and number. If you do not specify an interface, this command displays the proxy ARP status for all interfaces.

Usage guidelines

You can use this command to check whether proxy ARP is enabled or disabled.

Examples

# Display the proxy ARP status on VLAN-interface 2.

<Sysname> display proxy-arp interface vlan-interface 2
Interface Vlan-interface2
 Proxy ARP status: disabled

Related commands

proxy-arp enable