Configuring IPv6 local PBR

Configure IPv6 PBR by applying a policy locally. IPv6 PBR uses the policy to guide the forwarding of locally generated packets. The specified policy must already exist. Otherwise, the IPv6 local PBR configuration fails.

You can apply only one policy locally. Before you apply a new policy, you must first remove the current policy.

IPv6 local PBR might affect local services, such as ping and Telnet. Do not configure IPv6 local PBR unless doing so is required.

To configure IPv6 local PBR:

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Apply a policy locally.

ipv6 local policy-based-route policy-name

By default, no policy is locally applied.