Enabling IPv6 IS-IS ISPF
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter IS-IS view. | isis [ process-id ] [ vpn-instance vpn-instance-name ] | N/A |
3. Specify an IS-IS cost style. | cost-style { wide | wide-compatible | compatible } | By default, the IS-IS cost style is narrow. |
4. Enter IPv6 address family view. | address-family ipv6 [ unicast ] | N/A |
5. Enable IPv6 IS-IS MTR. | multi-topology [ compatible ] | By default, IPv6 IS-IS MTR is disabled. |
6. Enable IPv6 IS-IS ISPF. | ispf enable | By default, IPv6 IS-IS ISPF is enabled. |