Configuring the SoO attribute
After you configure the SoO attribute for a BGP peer or peer group, BGP adds the SoO attribute into the route updates received from the BGP peer or peer group. In addition, before advertising route updates to the peer or peer group, BGP checks the SoO attribute of the route update against the configured SoO attribute. If they are the same, BGP does not advertise the route updates to the BGP peer or peer group.
To configure the SoO attribute (IPv4 unicast/multicast address family):
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter BGP IPv4 unicast address family view, BGP-VPN IPv4 unicast address family view, or BGP IPv4 multicast address family view. |
| N/A |
3. Configure the SoO attribute for a peer or peer group. | peer { group-name | ipv4-address [ mask-length ] } soo site-of-origin | By default, no SoO attribute is configured for a peer or peer group. |
To configure the SoO attribute (IPv6 unicast/multicast address family):
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter BGP IPv6 unicast address family view, BGP-VPN IPv6 unicast address family view, or BGP IPv6 multicast address family view. |
| N/A |
3. Configure the SoO attribute for a peer or peer group. | peer { group-name | ipv6-address [ prefix-length ] } soo site-of-origin | By default, no SoO attribute is configured for a peer or peer group. |