Setting OSPF exit overflow interval
When the number of LSAs in the LSDB exceeds the upper limit, the LSDB is in an overflow state. To save resources, OSPF does not receive any external LSAs and deletes the external LSAs generated by itself when in this state.
Perform this task to configure the interval that OSPF exits overflow state.
To set the OSPF exit overflow interval:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter OSPF view. | ospf [ process-id | router-id router-id | vpn-instance vpn-instance-name ] * | N/A |
3. Set the OSPF exit overflow interval. | lsdb-overflow-interval interval | The default setting is 300 seconds. The value of 0 indicates that OSPF does not exit overflow state. |