Configuring Type-3 LSA filtering
Perform this task to filter Type-3 LSAs advertised to an area on an ABR.
To configure Type-3 LSA filtering:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter OSPF view. | ospf [ process-id | router-id router-id | vpn-instance vpn-instance-name ] * | N/A |
3. Enter area view. | area area-id | N/A |
4. Configure Type-3 LSA filtering. | filter { ipv4-acl-number | prefix-list prefix-list-name | route-policy route-policy-name } { export | import } | By default, the ABR does not filter Type-3 LSAs. |