Enabling split horizon and poison reverse

The split horizon and poison reverse functions can prevent routing loops.

If both split horizon and poison reverse are configured, only the poison reverse function takes effect.

Enabling split horizon

Split horizon disables RIP from sending routes through the interface where the routes were learned to prevent routing loops between adjacent routers.

To enable split horizon:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter interface view.	interface interface-type interface-number	N/A
3. Enable split horizon.	rip split-horizon	By default, split horizon is enabled.

Enabling poison reverse

Poison reverse allows RIP to send routes through the interface where the routes were learned. The metric of these routes is always set to 16 (unreachable) to avoid routing loops between neighbors.

To enable poison reverse:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter interface view.	interface interface-type interface-number	N/A
3. Enable poison reverse.	rip poison-reverse	By default, poison reverse is disabled.

prev	up	next
Setting RIP timers	home	Setting the maximum number of RIP ECMP routes