Configuring IPv4 RIB inter-protocol FRR
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter RIB view. | rib | N/A |
3. Create the RIB IPv4 address family and enter its view. | address-family ipv4 | By default, no RIB IPv4 address family exists. |
4. Enable IPv4 RIB inter-protocol FRR. | inter-protocol fast-reroute [ vpn-instance vpn-instance-name ] | By default, inter-protocol FRR is disabled. If you do not specify a VPN instance, inter-protocol FRR is enabled for the public network. |