Configuring IPv6 fast forwarding load sharing
IPv6 fast forwarding load sharing enables the device to load share packets of the same flow. This feature identifies a data flow by using the five-tuple (source IP, source port, destination IP, destination port, and protocol).
If IPv6 fast forwarding load sharing is disabled, the device identifies a data flow by the five-tuple and the input interface. No load sharing is implemented.
To configure IPv6 fast forwarding load sharing:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable IPv6 fast forwarding load sharing. | Ipv6 fast-forwarding load-sharing | By default, IPv6 fast forwarding load sharing is enabled. |