Specifying a flow classification policy
IMPORTANT: If a service requires packets of a flow to be received by the same CPU, you must use the flow-based policy. | ||
To specify a global flow classification policy:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Specify a flow classification policy. | forwarding policy { per-flow | per-packet } | By default, flow-based policy is used globally. |
To specify an interface-specific flow classification policy:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view | interface interface-type interface-number | N/A |
3. Specify a flow classification policy. | forwarding policy { per-flow | per-packet } | By default, flow-based policy is used on an interface. |