Configuring load sharing based on bandwidth
This feature load shares flow traffic among multiple output interfaces based on their load percentages. The device calculates the load percentage for each output interface in terms of the interface expected bandwidth.
Devices that run load sharing protocols, such as Locator/ID Separation Protocol (LISP), implement load sharing based on the ratios defined by these protocols.
To configure load sharing based on bandwidth:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable IPv4 load sharing based on bandwidth. | bandwidth-based-sharing | By default, the IPv4 load sharing based on bandwidth is disabled. |
3. Enter interface view. | interface interface-type interface-number | N/A |
4. Configure the expected bandwidth of the interface. | bandwidth bandwidth | By default, the expected bandwidth is the physical bandwidth of the interface. |