Enabling port halving for NAT load sharing
After you enable port block halving in VRRP load balancing, each port block will be equally divided between the two devices. The two devices will use different ports to translate packets from the same IP address, which avoids port assignment conflicts.
Do not use this feature in VRRP standard mode or when the device works in standalone mode.
To enable port halving for NAT load sharing:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable port halving for NAT load sharing. | nat port-load-balance enable slot slot-number | By default, port halving is disabled for NAT load sharing. |