Static domain name resolution configuration example
Network requirements
As shown in Figure 34, the host at 10.1.1.2 is named host.com. Configure static IPv4 DNS on the device so that the device can use the easy-to-remember domain name rather than the IP address to access the host.
Figure 34: Network diagram
Configuration procedure
# Configure a mapping between the host name host.com and the IP address 10.1.1.2.
<Sysname> system-view [Sysname] ip host host.com 10.1.1.2
# Verify that the device can use static domain name resolution to resolve the domain name host.com into the IP address 10.1.1.2.
[Sysname] ping host.com Ping host.com (10.1.1.2): 56 data bytes, press CTRL_C to break 56 bytes from 10.1.1.2: icmp_seq=0 ttl=255 time=1.000 ms 56 bytes from 10.1.1.2: icmp_seq=1 ttl=255 time=1.000 ms 56 bytes from 10.1.1.2: icmp_seq=2 ttl=255 time=1.000 ms 56 bytes from 10.1.1.2: icmp_seq=3 ttl=255 time=1.000 ms 56 bytes from 10.1.1.2: icmp_seq=4 ttl=255 time=2.000 ms --- Ping statistics for host.com --- 5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss round-trip min/avg/max/std-dev = 1.000/1.200/2.000/0.400 ms