Configuring the DHCP user class whitelist
The DHCP user class whitelist allows the DHCP server to process requests only from clients on the DHCP user class whitelist. The whitelist does not take effect on clients who request static IP addresses, and the server always processes their requests.
To configure the DHCP user class whitelist:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Create a DHCP user class and enter DHCP user class view. | dhcp class class-name | By default, no DHCP user class exists. |
3. Configure a match rule for the DHCP user class. | if-match rule rule-number { hardware-address hardware-address mask hardware-address-mask | option option-code [ ascii ascii-string [ offset offset | partial ] | hex hex-string [ mask mask | offset offset length length | partial ] ] | relay-agent gateway-address } | By default, no match rule is configured for a DHCP user class. |
4. Return to system view. | quit | N/A |
5. Create a DHCP address pool and enter DHCP address pool view. | dhcp server ip-pool pool-name | By default, no DHCP address pool exists. |
6. Enable the DHCP user class whitelist. | verify class | By default, the DHCP user class whitelist is disabled. |
7. Add DHCP user classes to the DHCP user class whitelist. | valid class class-name&<1-8> | By default, no DHCP user class is on the DHCP user class whitelist. |