Specifying an IP address and port number

Restrictions and guidelines

If server load balancing is configured, make sure the IP address and port number of the transparent DNS proxy are different than the virtual server of the UDP type.

As a best practice, configure an all-zero IP address for a transparent DNS proxy. In this case, all DNS requests are processed by the transparent DNS proxy.

Procedure

To specify an IP address and port number:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter transparent DNS proxy view.	loadbalance dns-proxy dns-proxy-name	N/A
3. Specify an IP address for the transparent DNS proxy.	Specify an IPv4 address:ip address ipv4-address [ mask-length \| mask ] Specify an IPv6 address:ipv6 address ipv6-address [ prefix-length ]	Use either command. By default, no IP address is specified for a transparent DNS proxy.
4. Specify the port number for the transparent DNS proxy.	port port-number	By default, the port number is 53 for a transparent DNS proxy.

prev	up	next
Creating a transparent DNS proxy	home	Specifying the default DNS server pool